The Journal of the Swimming Pool and Spa Industry is coming back! JSPSI, a peer-reviewed technical journal, began in 1995 as a subscription-supported print-based publication. It contained articles at a technical level, of interest especially to the more experienced members of the industry. The Journal discontinued publication in 2004, primarily due to the printing, binding and postage costs associated with a print journal.…Continue
Added by Que Hales on March 14, 2019 at 9:32pm — No Comments
All pool plaster finishes should last 20 years or more. However, some last only 5 to 7 years, and some less than a year before the plaster surface deteriorates, discolors, and looks terrible.
Why the difference? Very often, plaster quality. As we have pointed out previously, studies on pool plaster and cement/concrete flatwork have shown that poor workmanship practices have the greatest effect on durability, deterioration and discolorations. Various studies also confirm that water…Continue
For 50 years, the pool industry has considered pool water within an LSI of -0.3 and +0.5 to be acceptable and balanced. But recently, and without providing any supporting science or research, the NPC is trying to convince the industry that any negative LSI (-0.1 to -0.3) is unacceptable and immediately detrimental to pool plaster. Their theory also suggests that an alkalinity below 80 ppm, or a low calcium level (below 200 ppm) independently as being automatically…Continue
Added by Kim Skinner on February 6, 2019 at 4:24pm — No Comments
There are two important issues involved when trying to achieve quality colored pool plaster that will remain durable, attractive, and the proper shade for many years.
The first issue is to utilize superior workmanship practices to achieve good color, with minimal mottling, and no blotchiness, white streaking or soft spotting, which our previous email update addressed. (Note: Some pool owners prefer the slight mottling variation that is normal for colored plaster).
Added by Kim Skinner on January 17, 2019 at 3:30pm — No Comments
The Art of Good Pool Plaster Color
An attractive plaster color (other than white) is often preferred by pool owners. However, it is very difficult for plasterers to produce a uniform and consistent color. The reality is that there will always be some minor shading (mottling) and variation in the color and can never be uniform looking like paint or fiberglass.
One of the primary reasons for non-uniformity is that pool plaster a hand-finished product. It is…Continue
Added by Kim Skinner on January 17, 2019 at 3:25pm — No Comments
Using the Langelier Saturation Index as a guide for maintaining proper pool water balance and to protect pool plaster has become a mainstay in our industry, and we believe, for good reason.
We at onBalance have conducted several LSI experiments and have determined that maintaining a balanced LSI (-0.3 to +0.5) helps prevents scaling and prevent the etching of plaster finishes.
However, one plaster industry leader suggests that even when pool water is LSI balanced, if the…Continue
Added by Kim Skinner on October 12, 2018 at 3:36pm — No Comments
Is it Time to Clean or Replace your Pool Filter Cartridges? Find out now.
Nothing brings joy to pool owners’ as much as crystal clear waters on a hot summer day. Yes, pool owners are obsessed with the clarity and purity of the water in their pools (and they very well should be).…Continue
Added by Poo Filters on September 28, 2018 at 3:14am — No Comments
I have a real old Aqua Genie skimmer with a control valve.
My issue is there is no plumbing schematics detailing how to connect the feed inside the skimmer through the control assembly and into the bottom of the hopper. If anyone knows where I can fins a schematic I woulod appreciate it. I've called everyone online and checked out most pool and aqua genie web sites...…Continue
Added by David Robbins on August 18, 2018 at 7:33am — No Comments
Orenda Technologies has recently unveiled a new start-up program that prevents the formation of plaster dust by adding calcium (calcium chloride) to low calcium tap water while filling brand-new plaster pools. We have received communications asking us if this calcium program is compatible with, or a viable alternative to the Bicarbonate Start-up Method that also prevents plaster dust.
The Orenda start-up program can, in certain situations, be an effective alternative to the Bicarb…Continue
For pool builders, remodeling companies, and pool plasterers that want the best chance to obtain a quality and discoloration-free pool plaster finish (including white, color, and quartz aggregate pools), the link below is to an article in WaterShapes (a pool industry publication) that explains the preparations, workmanship, and practices to follow.
Consider performing personal supervision on the entire process to ensure good results.…
At what temp is wet down of curing gunite not neccessary?
Added by David Jamieson on April 13, 2018 at 3:55am — No Comments
During my visits to the Pool Stores, talking to Pool Store Owners & Store Managers, it is easy to perceive their concern around Online Sites competition. In a social media world and with the accelerated growth of e-Business, it is a valid concern, but instead let’s focus on understanding how the pool…
Added by HAROLDO J LEVEL, on February 5, 2018 at 10:21am — No Comments
To have crystal clear water is the ultimate desire of any swimming pool owner.
When your pool water becomes cloudy, not only does it looks less inviting but you could run the risk of exposing you and your family to an unwanted health hazard.
There are several causes for cloudy pool water.
Let’s talk about your pool's exposure to the environment and how it can be cleaned continuously…
Beginning in 2004, a series of plaster research studies were released by the National Plasterers Council (NPC), which they instigated and financially supported, and which were undertaken by the California Polytechnic State University in San Louis Obispo. In these studies, the researchers concluded that aggressive water conditions were the cause of “spot etching” and other plaster surface defects. The conclusions, and the quality of the research, have long been contested within the industry,…Continue
It appears that the pool industry’s long-time recommended parameters for chlorine and pH levels will be changing in the near future.
The current range of 1 to 4 ppm for chlorine will likely be raised when pool water contains cyanuric acid (CYA), and the pH range will be broadened beyond the current limited range of 7.2 to 7.8. The reason for this change is due to a new understanding of the science of stabilized pool water.
Some years ago, Richard Falk (known as Chemgeek on pool…Continue
The research and consulting group onBalance has decided to conduct new plaster research studies to generate additional evidence regarding the cause of unsightly plaster discolorations and defects. The plaster issues of concern are gray mottling discoloration of white plaster, white spotting of both colored and white plaster, calcium nodules, spalling, flaking, and craze-cracking.
One aspect of the study will be to construct two demonstration pools, each with sections of various…Continue
Added by Kim Skinner on March 23, 2017 at 3:29pm — No Comments
After a few months of beating my head against the wall, I could not stand it anymore. So I wrote a letter to anyone that would listen. Not many did, but a big thanks to Service Industry News. Maybe we can get some answers, maybe not.
I want to understand why the APSP, an association that is supposed to be “dedicated to the growth and development of its members businesses,” would propose a residential pool water chemistry standard.
There are so many reasons that this is…Continue
For at least 40 years, many pool service companies have been successfully maintaining their residential pools on a once-a-week visitation basis. Empirical evidence has shown that pool water can be kept safe and properly sanitized without harmful bacteria and algae developing with weekly treatment programs.
Also, pool service companies provide a great service by keeping hazardous chemicals out of the hands of pool owners and their children.
One reason that pools can be kept…Continue
Added by PGN Admin on September 15, 2016 at 9:40am — No Comments
It is amazing how incorrect information gets started, and gains traction despite being wrong, and not based on science. For example, contrary to some pool literature and manuals, it has been shown that a pH of 8.0 to 8.4 is workable, and sometimes is best for some pools.
Another misconception regarding pool water maintenance involves the recommended “Ideal” alkalinity range of 80 to 120 ppm. While that may be a good range for some pool situations, it is not necessarily the best when…Continue
Added by Kim Skinner on September 13, 2016 at 3:33pm — No Comments