Some time ago I had a book called "Million Dollar Mistakes in the Pool Industry"
There was a section devoted to the company who tried to manufacture Aluminum Skimmers, Lights, Jets, Bottom Drains which of course failed in pools.
Has anybody seen this book or have a copy that they can scan about Aluminum and why you cannot put it in Swimming Pools.
I notice they are making Aluminum Lights for Pools now (Par 56) which I know won`t last.
Kiwi Norman ; Email kiwipool@vodafone.net.nz
You need to be a member of Pool Genius Network™ to add comments!
If you are a member of the "pool industry" community, you have found your home.
This is a network of pool builders, service professionals, retailers, and pool sales reps,…
Swimming pools are often associated with luxury, relaxation, and endless summer fun. But there's more than just the allure of crystal-clear water that leads a…
The Journal of the Swimming Pool and Spa Industry is coming back! JSPSI, a peer-reviewed technical journal, began in 1995 as a subscription-supported print-based publication. It contained articles at a technical…
All pool plaster finishes should last 20 years or more. However, some last only 5 to 7 years, and some less than a year before the plaster surface deteriorates, discolors, and looks terrible.
Why the difference? Very often, plaster…
For 50 years, the pool industry has considered pool water within an LSI of -0.3 and +0.5 to be acceptable and balanced. But recently, and without providing any supporting science or research, the NPC is trying to convince the industry that any…
There are two important issues involved when trying to achieve quality colored pool plaster that will remain durable, attractive, and the proper shade for many years.
The first issue is to utilize superior workmanship practices to achieve…
Replies
Anodising the aluminium will give some protection to parts but it's still a poor choice although various parts of our jet ski's survived the sea water immersion because of anodising.
Aluminum is often used in railings and header bars for electric automatic covers, but these are not usually immersed in the water. If a header bar is immersed for a "vanishing" cover, it is usually required to have a zinc (or magnesium) sacrificial anode buried in moist soil and electrically connected to it (usually via the bonding wire). This is especially needed in saltwater chlorine generator pools due to the higher conductivity of the water from the higher salt levels. See the photos in the following link as an extreme example where salt splash-out accelerated such corrosion:
http://www.troublefreepool.com/autopilot-total-control-t3673.html#p...