Inground Pool, need a Rebuild, Concrete Bottom, Steel Sides = Big Issues
asking for a friend, and they are open to work with Qualified Vendors and Contractors : preferably Local - near Chicago area
Hello, does anyone know what this guy is using for his coping form? I'm talking about the board he is using to keep his coping level and even. I'm looking to purchase something. Video is in the link below.
https://www.youtube.com/watch?v=oqV-urx3Vzc
A
Read more…Hi,
Is there a guideline on number of lights to be installed in a swimming pool based on the lux or lumen information from supplier's catalog
Read more…Looking for experience/feedback on using a panel based stainless system such as Clayton-Lambert manufacturers.
This is for a residential pool built on a 15 degree slope with a wet edge, vanishing on the downhill side.
Received preliminary budget pricin
Read more…Hi everyone.I have just joined as I have a major pool project and would really appreciate some advice on what is possible.I am buying a house which has a swimming pool which as you will see from the photos is old and needs draining and a lot of maint
Read more…Hi everyone.I have just joined as I have a major pool project and would really appreciate some advice on what is possible.I am buying a house which has a swimming pool which as you will see from the photos is old and needs draining and a lot of maint
Read more…Hi everyone.I have just joined as I have a major pool project and would really appreciate some advice on what is possible.I am buying a house which has a swimming pool which as you will see from the photos is old and needs draining and a lot of maint
Read more…What waterproofing products perform best on weir walls inside and out.
Does any one have information on surge tank sensors that activate the edge circulation system when bathers enter the pool.
Is a waterproofing additive in mortar beds that are consta
Read more…I have a client that is wanting to used flamed granite inside and outside a spa that is currently in cosntruction. Has anyone had experience with flamed granite in a pool or spa? Did it last? Was it slippery? Were there challanges getting it to s
Read more…I hear a lot about soil stabilization techniques here in Texas; specifically soil injection. I heara LOT of pluses and minuses... I'm up in the air but do lean toward the old fashioned stand by, piers. What does everyone else think? Any thoughts a
Read more…Hi everybody, I am currently planning the installation of a perimeter overflow system on a San Juan fiberglass pool. I am looking for the best product to use as a channel. I am thinking of using the ACO brick slot drainage system that would be insert
Read more…I have a customer that is wanting a liner replacement but he has a pool shape I have no information for. Does anyone know of the shape "Key West"? I am looking for a dig spec so I can get the measurements.
Thanks
Read more…We install fiberglass pools as well as building gunite pools.I'm starting to get request to combine the two.I've looked around online but haven't found much information..Is there any available info outhere ?
Read more…One of my customers has a pool that may be a Foxx pool. It is an oval, rounded ends and straight sides. It's plastic coping pushes down from the top over the top of a wall that is about 3/8" thick. The old coping is junk and the liner needs to be rep
Read more…I am building my first gunite pool. I have few questions pertaining to the build. The pool is going to be 12x36 with a five foot deep end. What is the depth of your shotcrete ? I was going 6" on the wall and 9" on the floor with a 12" beam. I am putt
Read more…Is anyone aware of a source for royalty free swimming pool photos.
I am looking to generate a printed guide for our customers to use when shopping for a pool.
In the guide clients will be able to see the different types of swimming pools along with add
Read more…Adding kiln-fired porcelain art tile to your pool, fountain, spa, sauna, outdoor environment designs offers customers the ability to display their favorite art, photography, abstract look, etc. Taking advantage of adding art to your designs can set
Read more…I was wondering what an average price for a 20 x 40 gunite pool with the caretaker system and pebble tech or true tile runs in your area? I'm just wondering how my pricing is compared to everyone else's.
Read more…So, I have a site with a ground water table at 18" below existing grade. What in everyone’s experience is the best method to cope with the constant pressure exerted against the shell in the event water is drained.
Read more…I have a natural lagoon pool that I am designing for a client and my desire is to build into the beam natural boulders. In the end I want it to look like the boulders were there and the pool was built around it. I am concerned with engineering and wa
Read more…Inground Pool, need a Rebuild, Concrete Bottom, Steel Sides = Big Issues
asking for a friend, and they are open to work with Qualified Vendors and Contractors : preferably Local - near Chicago area
If you are a member of the "pool industry" community, you have found your home.
This is a network of pool builders, service professionals, retailers, and pool sales reps,…
Swimming pools are often associated with luxury, relaxation, and endless summer fun. But there's more than just the allure of crystal-clear water that leads a…
The Journal of the Swimming Pool and Spa Industry is coming back! JSPSI, a peer-reviewed technical journal, began in 1995 as a subscription-supported print-based publication. It contained articles at a technical…
All pool plaster finishes should last 20 years or more. However, some last only 5 to 7 years, and some less than a year before the plaster surface deteriorates, discolors, and looks terrible.
Why the difference? Very often, plaster…
For 50 years, the pool industry has considered pool water within an LSI of -0.3 and +0.5 to be acceptable and balanced. But recently, and without providing any supporting science or research, the NPC is trying to convince the industry that any…