You need to be a member of Pool Genius Network™ to add comments!
This reply was deleted.
If you are a member of the "pool industry" community, you have found your home.
This is a network of pool builders, service professionals, retailers, and pool sales reps,…
For…
Swimming pools are often associated with luxury, relaxation, and endless summer fun. But there's more than just the allure of crystal-clear water that leads a…
The Journal of the Swimming Pool and Spa Industry is coming back! JSPSI, a peer-reviewed technical journal, began in 1995 as a subscription-supported print-based publication. It contained articles at a technical…
All pool plaster finishes should last 20 years or more. However, some last only 5 to 7 years, and some less than a year before the plaster surface deteriorates, discolors, and looks terrible.
Why the difference? Very often, plaster…
For 50 years, the pool industry has considered pool water within an LSI of -0.3 and +0.5 to be acceptable and balanced. But recently, and without providing any supporting science or research, the NPC is trying to convince the industry that any…
There are two important issues involved when trying to achieve quality colored pool plaster that will remain durable, attractive, and the proper shade for many years.
The first issue is to utilize superior workmanship practices to achieve…
Replies
I have had good success with a product from Emotron; The PSP20. You can use it as your second layer of protection on any spa (or pool for that matter). They have been certified, by CPSC (ASME A112.19.17-2002), as a second layer of protection as an automatic shutoff device. Send me a note and I'll be glad to link you to them, or just visit my site, www.callthepoolguy.com and check out the post for it.
This along with new covers, may be the least expensive route for the owner.