Replies

  • Brian,

    Does the pool have a Main Drain??

    If, it does is their a Hydro-stat Valve, that u can get out??

    If, so just thread in a male adp. and glue a piece of pipe up w./ a 90 on it running over to a spair pump (It realy should be a Centfuge Pump: They suck Air & Water with out cosing Prime) then run it away from the pool.

    If, u can't get out the bottom plug then drill it out and do the same as above. JUST MAKE SURE THAT U CAN USE A RUBBER OR HAYWARD SP1022C TO PLUG THE HOLE.

    ANY FURTHER QUESTIONS i BE GLADE TO HELP, IF I CAN!!

    NV
This reply was deleted.

The LSI is Reliable

Using the Langelier Saturation Index as a guide for maintaining proper pool water balance and to protect pool plaster has become a mainstay in our industry, and we believe, for good reason.

We at onBalance have conducted several LSI…

Read more…

Aqua Genie

I have a real old Aqua Genie skimmer with a control valve.

My issue is there is no plumbing schematics detailing how to connect the feed inside the skimmer through the control assembly and into the bottom of the hopper.  If anyone knows…

Read more…
Comments: 0