Embracing Technology
Why is the pool industry 10 years behind most industries in adapting and embracing technology to assist them in becoming more proffesional and profitable?
Read more…
0 Replies
All Discussions (702)
Sort by
TA Levels
We are finding that some of our TA levels are dropping down 20-40 ppm within a 4 month period. Is this normal? If not, what should I be doing to prevent this from happening.Thank you!!!
Read more…Air Vent for VE System....
Hello to All,We have, two VE Pools this Year Already. One Vinyl and One Gunite. The reason for the Discussion is we have Never Used Check Valves on The VE Basin Pump. I was just Woundering The Different ways Orther Companys, have put an Air Vent Syst
Read more…multi-speed vs. two-speed
Which is better for the average pool owner that has a pool with attached spa, a multi-speed pump like the Intelliflo or a two-speed pump with compatible two-speed capable timer or relay?Personally, I believe there is no clear answer to this question,
Read more…Improve Closing Ratios
In my experience, in our industry, we should see between 22% to 26% closing ratios. We are currently experiencing about 19%. I am wondering if that is a result of the economy (more lookey-loos, sticker shock...). And aside from that, what suggestions
Read more…I m starting pool company!!
I have always loved swimming pools and have decided to do it as a business. Any advice would be greatly appreciated. Thanks in advance!
Read more…A very telling (free) marketing tool
I've spent the last few weeks completely revamping our website, and now that I have something worth showing I started doing some research on search engine optimization. That's when I stumbled across this little gem.
What are the most common questions about VGB, ANSI 7 and Barriers?
As I am preparing for a seminar with the NC Code Officials at some of their regional meetings I would like to be prepared for the questions they may ask. I have seen much confusion regarding velocity vs maximum flow rate; what and where an engineer n
Read more…Clearing rust and debris from return lines
We are experiencing several pools with rust and metals returning into the spa. What is the best method for clearing the lines? Is there a permanent solution, or will this continue to happen unless the heater is replaced?
Read more…Spa sump replacement
What is the opinion regarding sump replacement in spas. We have a spa in Colorado with two extremely shallow sumps (one for circulation and one for jets) which must be replaced. Are we required to install dual drains for each, or can we replace only
Read more…Altering an Anti-entrapment cover
I had a call today from someone wanting to know if they took the center part, (the drain cover) from the frame, and drilled new holes in the cover so it would match the existing frame, would they be in VGB compliance.They are using a Aquastar RFS9 XX
Read more…Humidity Wreaks Havoc on Electronics
I have a customer that has recurring CD equipment failures in thier indoor pool. They use the equipment for water arobics and is installed in the pool area. They are looking for a piece of equipment that can stand up to the humidity. Does anyone have
Read more…What Industry Shows-Expos Are You Most Likely to Attend?
I would like to know from everyone what industry shows-expos do you either exhibit or attend and why? With so many shows to choose from I would like to know the pros and cons of industry related shows.
Read more…Green stains in over chlorinated pool
I recently took over a pool service account that had a remarkablely large amount of green staining. The client has a Salt machine and PH chem pump. The pool was balanced but the Chlorine reading was well over 12-20PPM. The salt machine was turned up
Read more…Heaters vs Rodents
I'm in North Central Florida. Mice, Rats, and Squirels love to nest in gas heater cabinets, eat the wire harnesses and make a great mess.Have you found a solution to keep the rodents away. I've often suggested mothballs around the equipment. A custom
Read more…NSPF has announced it has approval as an authoried provider for IACET Approved Continuing Education Unit Credits (CEUs)
Hi all - great news: NSPF has just announced it has approval as an authorized provider for IACET Approved Continuing Education Unit Credits (CEUs). Here's the press release:This means industry members can learn through NSPF and earn CEUs!You can read
Read more…Liner Pictures Needed
So, I'm working on my website, and I made a section where people can see our selection of liner patterns in a real pool. I'm missing some patterns though. Here's what I'm missing:
NSPF sends newswire release about VGB Act deadline and issues to mainstream media today.
This release went out over the wires today, plus to all senators and congress.Controversial New Pool & Spa Safety Act Will Create Public Pool ClosuresNationwidePR Newswire -- December 12, 2008Legislation could force 300,000 public pools to shut down
Read more…If you are a member of the "pool industry" community, you have found your home.
This is a network of pool builders, service professionals, retailers, and pool sales reps,…
For…
Swimming pools are often associated with luxury, relaxation, and endless summer fun. But there's more than just the allure of crystal-clear water that leads a…
The Journal of the Swimming Pool and Spa Industry is coming back! JSPSI, a peer-reviewed technical journal, began in 1995 as a subscription-supported print-based publication. It contained articles at a technical…
All pool plaster finishes should last 20 years or more. However, some last only 5 to 7 years, and some less than a year before the plaster surface deteriorates, discolors, and looks terrible.
Why the difference? Very often, plaster…
For 50 years, the pool industry has considered pool water within an LSI of -0.3 and +0.5 to be acceptable and balanced. But recently, and without providing any supporting science or research, the NPC is trying to convince the industry that any…
There are two important issues involved when trying to achieve quality colored pool plaster that will remain durable, attractive, and the proper shade for many years.
The first issue is to utilize superior workmanship practices to achieve…
